I tasti per entrare nel BIOS del computer di qualsiasi marca: Acer, Asus, Dell, HP, Lenovo, Packard Bell, Sony, Toshiba, Sharp ecc
Solitamente la maggior parte dei comuni utenti ha avuto a che fare con il BIOS per la necessità di dover cambiare l’ordine di priorità di avvio del Boot ad esempio per installare il sistema operativo da CD/DVD, oppure per lanciare il software contenuto di una chiavetta USB avviabile.
Difatti il BIOS (acronimo di Basic Input Output System) è il primo software eseguito all’avvio del computer, attraverso il quale è possibile modificare il funzionamento del PC (magari e appunto per cambiare la sequenza di avvio) oppure per risolvere un qualche problema dato che dal BIOS si possono identificare e configurare le componenti hardware del computer quali il disco rigido, l’unità floppy, il masterizzatore/lettore CD/DVD, il processore, la memoria RAM e via dicendo.
Il BIOS viene eseguito automaticamente all’accensione del computer, ma per potervici accedere è necessario premere specifici tasti; tasti però che variano a seconda della marca del computer.
Ecco perché non si riesce ad entrarci anche se un amico insiste sul fatto che si deve pigiare F2, F8, Canc o altri tasti ancora. Si è vero, magari sul suo PC si fa così, però quel computer di che marca è?
Fra l’altro c’è anche da tenere in considerazione che alcuni BIOS e computer potrebbero avere più di un metodo di accesso.
A tale proposito sotto a seguire andiamo a vedere una lista dei tasti e/o combinazioni di tasti da premere per entrare nel BIOS delle più popolari marche di computer.
Acer (Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos): Premere [F2] o [Canc] subito dopo l’accensione.
Acer (Altos 600 Server): Premere [Ctrl]+[Alt]+[Esc] o [F1] durante il Boot (per le opzioni avanzate).
Acer (Vecchi PC): Premere [F1] o [Ctrl]+[Alt]+[Esc].
AMI (American Megatrends AMIBIOS, AMI BIOS): Premere [Canc] durante il Boot.
AMI (American Megatrends AMIBIOS, AMI BIOS) – Old Version: Premere [F1] o [F2] durante il Boot.
Award BIOS (AwardBIOS): Premere [Canc] dopo aver acceso il computer.
Award BIOS (AwardBIOS) – Vecchie versioni : Premere [Ctrl]+[Alt]+[Esc] durante il Boot.
ALR: Premere [Ctrl]+[Alt]+[Esc] o [Ctrl]+[Alt]+[Canc] durante il Boot.
ARI: Premere [Ctrl]+[Alt]+[Esc] o [Ctrl]+[Alt]+[Canc] durante il Boot.
AST Advantage: Premere [Ctrl]+[Alt]+[Esc] durante il Boot.
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable): Premere [F10] quando il cursore lampeggia in alto a destra dello schermo.
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable): Premere [F10] quando il logo viene mostrato sullo schermo.
Compaq (Vecchi Computer): Premere [F1], [F2], [F10], o [Canc].
Cybermax: Premere [Esc].
(adsbygoogle = window.adsbygoogle || []).push({}); Dell (XPS, Dimension, Inspiron, Latitude. OptiPlex, Precision, Vostro): Premere F2 quando viene mostrato il logo Dell.
Dell (Vecchi Modelli 486): Premere [Ctrl]+[Alt]+[Enter] durante il Boot.
Dell (Alcuni Modelli): Premere il tasto Reset due volte.
Dell Dimension L566cx System: Premere [Canc].
Dell (Vecchi modelli di Laptop) : Premere [Fn]+[Esc] o [Fn]+[F1].
DTK (Datatech Enterprises): Premere [Esc] dopo aver acceso il PC.
EISA Computer: Premere il tasto Reset posto frontalmente al computer, quindi premere [Ctrl]+[Alt]+[Esc] appena inizia il conteggio della memoria, oppure premere [Crtl]+[Alt]+[S].
eMachines (eMonster, eTower, eOne, S-Series, T-Series): Premere [Tab] o [Canc] durante il Boot.
eMachine (Alcuni vecchi computer): Premere [F2].
Fujitsu (LifeBook, Esprimo, Amilo, Tablet, DeskPower): Premere [F2] quando appare il logo Fujitsu.
Gateway Using Phoenix BIOS (DX, FX, One, GM, GT, GX, Profile, Astro): Premere [F1].
Gateway (Alcuni vecchi computer): Premere [F2]
Hewlett-Parkard (HP Pavilion, TouchSmart, Vectra, OmniBook, Tablet): Premere [F1] all’avvio del computer
Hewlett-Parkard (HP Alternative): Premere [F2] o [Esc]
Hewlett-Parkard (HP) Tablet PC: Premere [F10] o [F12]
IBM ThinkPad using IBM BIOS (Primi modelli): Premere [Ctrl]+[Alt]+[Ins] quando il cursore appare nell’angolo in alto a destra dello schermo
IBM ThinkPad using IBM BIOS (Recenti modelli): Premere e rilasciare [F1] quando il laptop è acceso
IBM ThinkPad using Phoenix BIOS: Premere [Ctrl]+[Alt]+[F11] dal prompt DOS
IBM PS/1 (Recenti modelli), PS/ValuePoint and 330s: Premere [Ctrl]+[Alt]+[?]
IBM PS/2 con Reference Partition: Premere [Insert] durante il Boot
IBM PS/2: Premere [Ctrl]+[Ins] quando il puntatore è in alto a destra dello schermo
IBM PS/2: è necessario il disco di riferimento e il disco ADF per di installazione
IBM PS/2 75 and 90: Premere [Ctrl]+[Alt]+[?]
IBM (PC, XT, AT): Premere [F1] subito dopo l’accensione
IBM (Vecchi computer e notebooks): Premere [F2]
Lenovo (ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation): Premere [F1] o [F2] al boot
Lenovo (Vecchi computer): Premere [Ctrl]+[Alt]+[F3], [Ctrl]+[Alt]+[Ins] o [Fn]+[F1]
Microid Research MR BIOS: Premere [F1]
Micron (MPC Computers ClientPro, TransPort): Press [F1], [F2] o [Canc] all’avvio
NEC (PowerMate, Versa, W-Series): Premere [F2] durante il boot
NEC Versa Notebook: Premere e rilasciare [F1] all’avvio o al boot
Olivetti PC Pro: Premere [Ctrl]+[Alt]+[Shift]+[Canc](del Num Pad) durante il boot
Packard Bell (8900 Series, 9000 Series, Pulsar, Platinum, EasyNote, imedia, iextreme): Premere [F1], [F2], o [Canc]
Packard Bell (Primi 386 e 486 Dodels): Premere [Ctrl]+[Alt]+[S]
Phoenix BIOS (Phoenix-Award BIOS): Premere [Canc] durante il il test automatico
Phoenix BIOS (Phoenix-Award BIOS) – Old Version: Premere [Ctrl]+[Alt]+[S], [Ctrl]+[Alt]+[Esc], [Ctrl]+[Alt]+[Ins] o [Ctrl]+[S] durante l’avvio o il boot
Sharp (Notebook Laptops, Actius UltraLite): Premere [F2] all’accensione
Sharp (Vecchi PC): richiede il setup di diagnostica
Shuttle (Glamor G-Series, D’vo, Prima P2-Series, Workstation, X Mini XPC, Surveillance): Premere [F2] o [Canc] all’avvio del sistema
Sony (VAIO, PCG-Series, VGN-Serie): Premere [F1], [F2] o [F3] all’accensione del computer
Sony Vaio 320 Series: Premere [F2] durante il boot
Tandon 386: Premere [Ctrl]+[Shift]+[Esc]
Tandon: Premere [Ctrl]+[Shift]+[Esc]
Toshiba (Portégé, Satellite, Tecra): Premere [Esc] durante il boot
Toshiba (Portégé, Satellite, Tecra with Phoenix BIOS): Premere [F1] durante il boot
Zenith, Phoenix: Premere [Ctrl]+[Alt]+[Ins] durante il boot
Altri comuni tasti e combinazioni di tasti per accedere al BIOS, da provare qualora il computer non è presente nell’elenco qui sopra:
Difatti il BIOS (acronimo di Basic Input Output System) è il primo software eseguito all’avvio del computer, attraverso il quale è possibile modificare il funzionamento del PC (magari e appunto per cambiare la sequenza di avvio) oppure per risolvere un qualche problema dato che dal BIOS si possono identificare e configurare le componenti hardware del computer quali il disco rigido, l’unità floppy, il masterizzatore/lettore CD/DVD, il processore, la memoria RAM e via dicendo.
Il BIOS viene eseguito automaticamente all’accensione del computer, ma per potervici accedere è necessario premere specifici tasti; tasti però che variano a seconda della marca del computer.
Ecco perché non si riesce ad entrarci anche se un amico insiste sul fatto che si deve pigiare F2, F8, Canc o altri tasti ancora. Si è vero, magari sul suo PC si fa così, però quel computer di che marca è?
Fra l’altro c’è anche da tenere in considerazione che alcuni BIOS e computer potrebbero avere più di un metodo di accesso.
A tale proposito sotto a seguire andiamo a vedere una lista dei tasti e/o combinazioni di tasti da premere per entrare nel BIOS delle più popolari marche di computer.
Acer (Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos): Premere [F2] o [Canc] subito dopo l’accensione.
Acer (Altos 600 Server): Premere [Ctrl]+[Alt]+[Esc] o [F1] durante il Boot (per le opzioni avanzate).
Acer (Vecchi PC): Premere [F1] o [Ctrl]+[Alt]+[Esc].
AMI (American Megatrends AMIBIOS, AMI BIOS): Premere [Canc] durante il Boot.
AMI (American Megatrends AMIBIOS, AMI BIOS) – Old Version: Premere [F1] o [F2] durante il Boot.
Award BIOS (AwardBIOS): Premere [Canc] dopo aver acceso il computer.
Award BIOS (AwardBIOS) – Vecchie versioni : Premere [Ctrl]+[Alt]+[Esc] durante il Boot.
ALR: Premere [Ctrl]+[Alt]+[Esc] o [Ctrl]+[Alt]+[Canc] durante il Boot.
ARI: Premere [Ctrl]+[Alt]+[Esc] o [Ctrl]+[Alt]+[Canc] durante il Boot.
AST Advantage: Premere [Ctrl]+[Alt]+[Esc] durante il Boot.
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable): Premere [F10] quando il cursore lampeggia in alto a destra dello schermo.
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable): Premere [F10] quando il logo viene mostrato sullo schermo.
Compaq (Vecchi Computer): Premere [F1], [F2], [F10], o [Canc].
Cybermax: Premere [Esc].
(adsbygoogle = window.adsbygoogle || []).push({}); Dell (XPS, Dimension, Inspiron, Latitude. OptiPlex, Precision, Vostro): Premere F2 quando viene mostrato il logo Dell.
Dell (Vecchi Modelli 486): Premere [Ctrl]+[Alt]+[Enter] durante il Boot.
Dell (Alcuni Modelli): Premere il tasto Reset due volte.
Dell Dimension L566cx System: Premere [Canc].
Dell (Vecchi modelli di Laptop) : Premere [Fn]+[Esc] o [Fn]+[F1].
DTK (Datatech Enterprises): Premere [Esc] dopo aver acceso il PC.
EISA Computer: Premere il tasto Reset posto frontalmente al computer, quindi premere [Ctrl]+[Alt]+[Esc] appena inizia il conteggio della memoria, oppure premere [Crtl]+[Alt]+[S].
eMachines (eMonster, eTower, eOne, S-Series, T-Series): Premere [Tab] o [Canc] durante il Boot.
eMachine (Alcuni vecchi computer): Premere [F2].
Fujitsu (LifeBook, Esprimo, Amilo, Tablet, DeskPower): Premere [F2] quando appare il logo Fujitsu.
Gateway Using Phoenix BIOS (DX, FX, One, GM, GT, GX, Profile, Astro): Premere [F1].
Gateway (Alcuni vecchi computer): Premere [F2]
Hewlett-Parkard (HP Pavilion, TouchSmart, Vectra, OmniBook, Tablet): Premere [F1] all’avvio del computer
Hewlett-Parkard (HP Alternative): Premere [F2] o [Esc]
Hewlett-Parkard (HP) Tablet PC: Premere [F10] o [F12]
IBM ThinkPad using IBM BIOS (Primi modelli): Premere [Ctrl]+[Alt]+[Ins] quando il cursore appare nell’angolo in alto a destra dello schermo
IBM ThinkPad using IBM BIOS (Recenti modelli): Premere e rilasciare [F1] quando il laptop è acceso
IBM ThinkPad using Phoenix BIOS: Premere [Ctrl]+[Alt]+[F11] dal prompt DOS
IBM PS/1 (Recenti modelli), PS/ValuePoint and 330s: Premere [Ctrl]+[Alt]+[?]
IBM PS/2 con Reference Partition: Premere [Insert] durante il Boot
IBM PS/2: Premere [Ctrl]+[Ins] quando il puntatore è in alto a destra dello schermo
IBM PS/2: è necessario il disco di riferimento e il disco ADF per di installazione
IBM PS/2 75 and 90: Premere [Ctrl]+[Alt]+[?]
IBM (PC, XT, AT): Premere [F1] subito dopo l’accensione
IBM (Vecchi computer e notebooks): Premere [F2]
Lenovo (ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation): Premere [F1] o [F2] al boot
Lenovo (Vecchi computer): Premere [Ctrl]+[Alt]+[F3], [Ctrl]+[Alt]+[Ins] o [Fn]+[F1]
Microid Research MR BIOS: Premere [F1]
Micron (MPC Computers ClientPro, TransPort): Press [F1], [F2] o [Canc] all’avvio
NEC (PowerMate, Versa, W-Series): Premere [F2] durante il boot
NEC Versa Notebook: Premere e rilasciare [F1] all’avvio o al boot
Olivetti PC Pro: Premere [Ctrl]+[Alt]+[Shift]+[Canc](del Num Pad) durante il boot
Packard Bell (8900 Series, 9000 Series, Pulsar, Platinum, EasyNote, imedia, iextreme): Premere [F1], [F2], o [Canc]
Packard Bell (Primi 386 e 486 Dodels): Premere [Ctrl]+[Alt]+[S]
Phoenix BIOS (Phoenix-Award BIOS): Premere [Canc] durante il il test automatico
Phoenix BIOS (Phoenix-Award BIOS) – Old Version: Premere [Ctrl]+[Alt]+[S], [Ctrl]+[Alt]+[Esc], [Ctrl]+[Alt]+[Ins] o [Ctrl]+[S] durante l’avvio o il boot
Sharp (Notebook Laptops, Actius UltraLite): Premere [F2] all’accensione
Sharp (Vecchi PC): richiede il setup di diagnostica
Shuttle (Glamor G-Series, D’vo, Prima P2-Series, Workstation, X Mini XPC, Surveillance): Premere [F2] o [Canc] all’avvio del sistema
Sony (VAIO, PCG-Series, VGN-Serie): Premere [F1], [F2] o [F3] all’accensione del computer
Sony Vaio 320 Series: Premere [F2] durante il boot
Tandon 386: Premere [Ctrl]+[Shift]+[Esc]
Tandon: Premere [Ctrl]+[Shift]+[Esc]
Toshiba (Portégé, Satellite, Tecra): Premere [Esc] durante il boot
Toshiba (Portégé, Satellite, Tecra with Phoenix BIOS): Premere [F1] durante il boot
Zenith, Phoenix: Premere [Ctrl]+[Alt]+[Ins] durante il boot
Altri comuni tasti e combinazioni di tasti per accedere al BIOS, da provare qualora il computer non è presente nell’elenco qui sopra:
- [Ctrl]+[Esc]
- [Ctrl]+[Ins]
- [Ctrl]+[Alt]
- [Ctrl]+[Alt]+[+]
- [Ctrl]+[Alt]+[F3]
- [Ctrl]+[Alt]+[Del]
- [Ctrl]+[Alt]+[S]
- [Ctrl]+[Alt]+[Invio]
- [Ctrl]+[Alt]+[Ins]
- [Ctrl]+[Alt]+[Esc]
- [Ctrl]+[Shift]+[Esc]
- [Tab]
- [F1]
- [F3]
- [F4]
- [F10]
- [F12]
- [Fn]+[Tasto funzione]